2
3
SAFETY INSTRUCTIONS
• Please read through the instructions before using
this air purifier and keep this instruction manual
in a safe place.
• This appliance is not intended for use by children
and persons with reduced physical, sensory or
mental capabilities, or lack of experience and
knowledge of the product, unless they are super-
vised and have been given instructions concerning
use of the appliance by a person responsible for
their safety.
• Children should be supervised to ensure that
they do not play with the appliance.
• Ensure that the connected voltage supply is
the same as marked on the rating label.
• The air purifier is an electrical appliance and
should be treated as such. Be particularly careful
to avoid accidents during installation, use, and
maintenance.
• The air purifier should be installed and cleaned
by adults.
• The air purifier should be installed according to
the instructions, at the correct distance from a
wall and placed on a secured and stable surface.
If incorrectly placed, the air purifier may fall
and cause injury to people or damage to its
surroundings.
• We recommend that you place the Style/Surface/
Sky models at least 3 feet (1 meter) away from
all walls and furniture and that you hang the Sky
model 1.5 feet (0.5 meter) down from the ceiling.
If these recommendations are not followed,
nearby walls and/or furniture may become
somewhat dirty.
• Never use the air purifier with a damaged
power cable, damaged transformer or
damaged electronics.
• If the main lead is damaged it must be replaced
by a qualified person.
• To prevent from electric shock, fire, personal
injury and any other hazard do not immerse the
air purifier including the transformer into water or
any other liquid.
• Do not place the air purifier or cable near
a heat source.
• Do not use the air purifier outdoors.
• Do not use the air purifier in damp rooms.
• Do not use the air purifier in conjunction with
coloured or oil-based candles, as they emit
soot which can become attached to walls
and furniture.
• You may experience a small electric discharge
when touching the collector. This is harmless!
If you find this discharge unpleasant, unplug
the appliance before handling it and use the
protective guard when the air purifier is on.
Note that the protective guard is optional and
not necessary from a safety perspective.
CLEANING AND MAINTENANCE
• You MUST disconnect the power supply and turn off
the air purifier before cleaning.
• Do NOT wash the collector in the dishwasher.
• Do NOT use cleaning products that contain
alcohol solutions, ammonia, or alkaline substances,
as these products may damage the air purifier.
• The collector should be cleaned approx. once
every two weeks or when needed. The collector
may require more frequent cleaning if used in
highly contaminated environments.
CLEANING THE COLLECTOR:
1.
Clean the collector with washing-up liquid, water,
and a soft sponge.
2.
Dry the collector with a dish towel.
3.
Put the collector back on the ion generator
according to the above instructions.
If you have followed the above instructions but the
collector is still not clean, try the following:
1.
Spray detergent onto the collector and let it work
for 5 minutes.
2.
Use a damp sponge and rub any remaining spots
until they disappear.
3.
Dry the collector with a dish towel and place it
back on the ion generator according to the above
instructions.
4.
Repeat the above procedure if necessary.
CLEANING THE ION GENERATOR,
CORONA NEEDLES AND ACRYLIC STAND:
• Once every four months you may need to carefully
clean the fragile corona needles. Use a small brush
(e.g. a toothbrush) and carefully brush away the
thin layer of white lime scale and dirt which may
have become attached to the needles. Do not use
pressure or water when you clean the needles.
• Clean the ion generator and the acrylic stand with
a damp cloth or sponge. Wipe clean and rub
away any remaining dirt and dry with a towel. Do
not allow the top and bottom of the ion generator
to come into contact with water and be careful with
the corona needles.
PRODUCT DESCRIPTION
IONFLOW 50 STYLE & 50 SURFACE:
1 ion generator (above= 3 corona needles,
below=outlet and metal hook)
1 collector
1 acrylic stand
1 switch
1 transformer
8 decorative lights (4 in the appliance & 4 extra)
1 protective guard (32 slats and 2 assembly rings)
IONFLOW 50 SKY:
1 ion generator (above=outlet and metal hook,
below=3 corona needles)
1 collector
1 extension lead
1 transformer
1 pressure relief device
1 pressure relief hook
ENGLISH
ENGLISH
CLICK!
CLICK
x1
CLICK
x2
CLICK
x3
Note: LightAir cannot be held responsible for
any damage caused as a result of failure to
follow the recommendations.
ASSEMBLY INSTRUCTIONS
IONFLOW 50 STYLE & SURFACE
IONFLOW 50 SKY
ACCESSORIES
IONFLOW 50
STYLE & SURFACE:
• 8 Decorative lights
• Protective guard
+3 FT / 1M