Lightair CellFlow Pro900, Руководство пользователя

Страница: 16 / 32

16
• There is an included wall bracket aimed for the
remote hand control
• There is a self adhesive tape, on the back side,
discard the protective film and glue firmly
in any place
• The wall bracket has two holes for mounting
by screws, screws not included
WALL BRACKET FOR HANDSET REMOTE CONTROL
3. 4.
•
Substitute the removed screws with tie-down
lugs (anchor brackets) according to the picture.
• It is of a key importance to make use of the
washer with lock nut, this nut can be used
to correct the product’s height and weight
horizontally.
•
After that, attach the S-hook to the tie-down
lugs (anchor brackets) and fasten the chain to
the S-hook.
• The product is ready to be hanged when
all items are installed according to the picture
• Important! The product must never be
hanged closer than 250 mm from the ceiling
measured from the backside of the product,
kindly refer to the arrow instructions’ picture!
ENGLISH
Important!
The product must be connected to an earthed wall socket
to obtain optimal performance!