4. The sparking machine can be used on the ground horizontally only. The machine should have 50CM
clearance all around. Keep away from children, flames, flammable and explosive materials. Keep a
minimum of 40CM away from the output nozzle to prevent scalding.
5. Do not allow machine to run out of powder. If the machine is allowed to run empty, it may cause
the motor and heater to be damaged ,Turn off the power before adding powder and do not allow
powder to enter the inside of the housing ,as internal electrical damage may result.
6.If spark output is low ,or there is noise from motor, or the machine stops creating spark altogether.
Do not modify or repair the machine by yourself. Please contact the dealer.
4.6 Important Operational instructions
1.This machine can be put upright only , not sideways, flat.
Please keep it upright. Otherwise, the sparks will not be vertical and the machine will be damaged.
2.Add powder and TIGHTEN the cap
3.NEVER POUR SPARK POWDER INTO THE SPARK DISCHARGE OPENING! THIS CAN BE DANGEROUS!
SPARK POWDER MUST ONLY BE ADDED TO THE STORAGE TANK THAT REQUIRES THE REMOVAL OF THE
PROTECTIVE CAP. DO NOT OVERFILL! AFTER FILLING REPLACE CAP AND TIGHTEN.
4.Please do not test the spark for a long time, which will reduce the use time of the machine sparking.
5.After each time use before shipped ,please clear granules from storage tank, allow machine to cool,
then remove tank cap and invert machine to shake granules out of tank.
6.The powder should not be exposed to the air. If a bag of powder is not used up, it should be kept in
a sealed condition and not exposed to open fire. Store or dispose of properly!
7.Damages caused by the disregard of this user manual are not subject to warranty. The dealer will not
accept liability for any consequent secondary failures. Only skilled workers are allowed to carry out the
electrical connections.
8.Outdoor powder cannot be used indoors! When using outdoor powder, there should be no carpet
around the spark machine, and other inflammable articles!
4.7 RFID card FAQ
◆
Why we have to use safety card before use ?
To avoid damage to the machine caused by powders not suitable for the machine. PLEASE USE
LIGHT4ME SPARK V2 POWDER ONLY!
To avoid the accident that may cause by unauthorized person or children by mistake.
Please keep the card for the right person only.
◆
Where you can find the card and How to use it ?
The safety card is packaged together with our powders ,Each bag of powder should have one card .
Tap the Card to the Induction zone to activate the device. Each card enables the unit to work 20
minutes(that’s almost the using time for one bag powder ). In the meantime, the card will be invalid
after being read one time.
Содержание SPARK V2
Страница 1: ...SPARK V2 USER MANUAL INSTRUKCJA OBS UGI...