9)
Please never use the power cable which was damaged the insulation cover, meanwhile,
never put the power cable on any other wire. Please pull out the power cable by handle the plug
when light is stop working or cleaning, never pull out it roughly or handle the wire directly.
10)
The light doesn’t include any spare parts for repair, please
check if all the parts are well
installed and screws are drove tightly before operating. It’s prohibited to use the light when the
cover is opened.
Notice: Please make sure it’ s power off before any installation, repair and clean!
III Technology Parameter
1)
Control Channels: 7 DMX Channels
2)
Control Mode: AUTO, Sound, Master/Slave, DMX512
3)
Working environment: -20
o
C- +40
o
C
4)
Mixing Color: RGBW
5)
IP Grade: IP20
6)
Power supply: AC 100-240V
7)
LED Lamp: 6X4W
8)
Power consumption: 30W
9)
Dimensions: 13x13x13cm
10)
Weight: 0,58kg
Connection of power/wire/signal
The exclusive plug should be used between the connection of light and power. And please confirm if
the rated voltage and frequency is accordance with the power supply or not. Please reduce the
connected lights numbers in order to avoid any accident because of overlarge electric current during
operation, it is suggested that connected lights should not be above 10pcs.
Make sure installation position is steady before fix the light. Professional clamp should be used when
the light is reverse hanging, and drive the clamp into the screw hole which in the bracket of the light.
Make sure the light will not fall from the truss, use the safety cable go through the truss and bracket
of the light as a supporting, to avoid the light to fall down. There is no entrance to the work area
during mounting. Periodically to check if the safety cable has fretted away or clamp is loosen. We will
not take any responsibility which caused by the lighting fall of unsteady hanging.