User manual
LEDForce 18 RGB
1.Safety instructions
- Every person involved with the installation, operation and maintenance of this device has to :
be qualified
follow the instructions of this manual
- CAUTION! Be careful with your operations. With a dangerous voltage you can suffer a dangerous electric
shock when touching the wires!
- This device has left our premises in absolutely perfect condition. In order to maintain this condition and
to ensure a safe operation, it is absolutely necessary for the user to follow the safety instructions and
warning notes written in this user manual.
- Important: Damages caused by the disregard of this user manual are not subject to warranty.
The distributor will not accept liability for any resulting defects or problems.
- Keep away from heaters and other heating sources!
- If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not switch it
on immediately. The arising condensation water might damage your device. Leave the device switched off
until it has reached room temperature.
- Make sure that the power-cord is never crimped or damaged by sharp edges. Check the device and
the power-cord from time to time.
- If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by
the manufacturer or his service agent or a similar qualified person in order to avoid a hazard.
- shields, lenses or ultraviolet screens shall be changed if they have become visibly damaged to such
an extent that their effectiveness is impaired, for example by cracks or deep scratches.
- Never let the power-cord come into contact with other cables! Handle the power-cord and all connections
with the mains with particular caution!
- Make sure that the available voltage is not higher than stated in this manual.
- Always disconnect from the mains, when the device is not in use or before cleaning it. Only handle
the power-cord by the plug. Never pull out the plug by tugging the power-cord.
- During the initial start-up some smoke or smell may arise. This is a normal process and does not
necessarily mean that the device is defective.
- DANGER OF BURNING! Never touch the device during the operation! The housing heats up to the housing
temperature.
- Don't switch the device on and off in short intervals as this would reduce the lamp's life.
- HEALTH HAZARD! Never look directly into the light source, as sensitive persons may suffer an epileptic
shock (especially meant for epileptics)!
- Always disconnect from the mains, when the device is not in user or before cleaning it.
- Please note that damages caused by manual modifications on the device or unauthorized operation
by unqualified persons are not subject to warranty.
- Keep away children and amateurs from the device!
- There are no serviceable parts inside the device. Maintenance and service operations are only to be
carried out by authorized dealers.
2.Operating instructions
. This system has DMX Online mode and Stand-alone Mode. Online mode can link other units and be
controlled by the DMX controller. And Stand-alone Mode has the functions of Sound, Auto Mixcolor
and Strobe and so on.
. If a DMX signal is present under Online mode, the DMX LED will blink very fast to indicate.While under
Master/Slave mode, Master´s LED indicator will light and Slave´s ona will blink to indicate.
3. Button Function Description:
Press MODE button to select your desire mode.
And press UP or Down button to select DMX address,
switch AUTO MODE,adjust the speed value and select
color. Up key is to add value. Down key is to reduce value.
(Note: If you press UP or DOWN key more than seconds,
you can select quickly.)
Содержание LEDForce 18 RGB
Страница 1: ......
