Light RC EPP 36" MSXR, Инструкция по эксплуатации

Страница: 7 / 13

Carbon can now be added for landing gear legs, (2) 6mm x 1 mm x 9-1/2” long. A notch is
provided in front of wing and a slot is precut for intersecting point in vertical fuselage. These
are glued into place at notches and intersecting point being sure to pull carbon up away
from table to top of slot.
Install the formed
plastic parts. Cut
the formed plastic
into sections that
fit onto the bottom
of the wheel
section of the
wheel pant foam.