LIGHT MY BRICKS LEGO R2-D2 75308, Руководство по установке

Страница: 13 / 41

LEGO R2-D2™ 75308 LIGHT & SOUND KIT INSTALL GUIDE
INSTRUCTIONS 13
7
Legend
DISCONNECT
CONNECT /
RECONNECT
TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
Ensure the LED
is facing the back of
the brick as shown
12-Port Expansion Board
If you experience any issues with the lights not working and suspect an issue with a component, please try a different port on the expansion board to verify where the fault lies (with the light or
expansion board). To correct any issues with expansion board ports, please view the section addressing expansion board issues in our troubleshooting section.
USB power Cable
6
Connect to a
USB Power Bank,
USB to AA Battery
Pack or USB Wall
Adaptor (each sold
separately)
Connect the two
Bit Lights from step
2 and 3 as well as
the 5cm Connecting
Cable to the 12-Port
Expansion Board
Secure the
second Bit Light with
the 1x6 Plate from
Step 4
2x Trans Light Blue 1x1 Plate