BRICK BANK 10251 LIGHT KIT INSTALL ATION GUIDE
INSTALL ATION GUIDE
35
LEGEND:
DISCONNECT
TURN / FLIP
TWIST / BRAID
DIRECTIONAL
POWER ON / TEST
CONNECT / RECONNECT
CHECK YOUR WIRES
In order for Light My Bricks
components to fit in between and
underneath LEGO® bricks, the
components need to be very small.
Due to this nature, Light My Bricks
components can be easily damaged
when not handled correctly.
Be careful when removing unpacked
components out of the packaging and
ensure not to forcibly pull at the wires
as this can damage the soldering that
attach the wires to the LEDs.
If the wiring is detached from the
LED itself, the light will not operate.
When connecting lights to your LEGO
set, check that there are no pinched
wires underneath or in between bricks
and plates. When the wires are pinched
and the exposed wires are touching
each other, this can cause a crosswire
and the lights to not function correctly.
Troubleshooting
TROUBLESHOOTING
