LIGHT MY BRICKS Blade Runner Spinner, Руководство по установке

Страница: 31 / 45

BLADE RUNNER SPINNER LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 31
28 29
Legend
DISCONNECT
CONNECT /
RECONNECT
TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
Connect the Red
Bit Light in the Trans
Red Plate to Port 1-1.
Connect the Blue
Bit Light in the Trans
Blue Plate to the
Port 1-3.
Rotating Sequence Effects
Board
Connect the Bit Light
from under the Trans
Orange Tile to Port 1-2.
Connect the Bit Light
from under the Trans
Blue Round Tile to port
1-4.
Connect the other
section of emergency
lights to the Rotating
Sequence Effects Board
repeating the same
sequence but to OUT-2
channel ports.
e.g. First connect 2-1,
2-3, then 2-1, 2-4.”
x2
The left and right
light sections should
be pulse flashing in the
same sequence as each
other.
If you experience any issues with the lights not working and suspect an issue with a component, please try a different port on the expansion board to verify where the fault lies (with the light or
expansion board). To correct any issues with expansion board ports, please view the section addressing expansion board issues in our troubleshooting section.