LEGO 1989 BAT WING 76161 LIGHT KIT INSTALL ATION GUIDE
INSTAL ATION GUIDE
4
LAYING CABLES IN BETWEEN
AND UNDERNEATH BRICKS
Cables can fit in between and
underneath LEGO® bricks, plates, and
tiles providing they are laid correctly
between the LEGO® studs. Do NOT
forcefully join LEGO® together around
cables; instead ensure they are laying
comfortably in between each stud.
CAUTION: Forcing LEGO® to connect
over a cable can result in damaging
the cable and light.
CONNECTING CABLE CONNECTORS
TO EXPANSION BOARDS
Take extra care when inserting
connectors to ports of Expansion
Boards. Connectors can be inserted
only one way. With the expansion
board facing up, look for the soldered
“=” symbol on the left side of the port.
The connector side with the wires
exposed should be facing toward the
soldered “=” symbol as you insert into
the port. If a plug won’t fit easily into
a port connector, do not force it.
Incorrectly inserting the connector
can can result in bent pins inside the
port or possible overheating of the
expansion board when connected.
Before You Begin
BEFORE YOU BEGIN
