To switch the 4XPG Hand Torch twist the head as shown by arrows. To switch it off, twist
the head to the first moment when the light goes off and stop.
Before every dive check the condition of orings that seal the body of 4XPG hand torch.
Torn, cut or damaged orings should be replaced with new ones as they may cause
flooding of the toch.
The oring sealing the body to the head should be lightly smeared with technical petroleum
jelly (vaseline) or other nonaggressive mean (e.g. handcream) which makes it easier to
operate the light underwater and makes it watertight.
From time to time clean the surface that touches the inside of 4XPG torch head (marked in
the drawing).
Remove any dust or grain from the orings before twisting the body to the head.
While slowly twisting the body to the head make sure the sealing orings are correctly
placed in their position and are not twisted or sticking out. Orings should sit firmly in their
grooves and should not be too loose as they may not work properly underwater.
Recommended 18650 Li-Ion batteries:
Samsung ICR
Panasonic NCR 18650B series (see photo below)
www.light-for-me.com
