3
press again and the LED colour will change to indicate the band you are on.
If the LED is lit up constantly, there is no DMX or wireless signal. LED flashing red will mean the unit is
transmitting. LED flashing green indicates receiving.
Please note that in order for units to communicate, they must be on the same band – indicated by the solid colour of
the LED.
In order to establish communication, make sure all units within the system are on the same band. If there are
multiple separate independent DMX systems (up to 7) in the same area, please choose different bands for each. The
WDMX will choose its own clear and interference-free frequency to transmit on, while the receiver will determine
the frequency it needs to receive DMX. The flashing green light on the receiver will indicate communication has
been established.
5. DMX-512 Control Connection
The WDMX needs to connect to fixtures and DMX controllers using 3 pin XLR cable. You can connect
the product to a DMX controller and then to other fixtures with 3 pin XLR inputs and outputs. The
signal cable should have two core with shielded cable, the signal connectors are XLR input and output
connectors. Please refer to the below diagram: