background image

 

5

6. DMX Address Setting 

 

When being used in conjunction with a DMX controller, each fixture must be set a specific starting address. When 

receiving signal, fixture will receive channel control signals of this address from the DMX controller. 

 

For simplicity, the user can use the same address for multiple fixtures but this will result in each fixture providing 

exactly the same output and fixtures with the same DMX address cannot be individually controlled. 

 

To control each fixture individually via DMX, each fixture must have its own unique DMX address. As this fixture 

uses 7 DMX channels, each address must be at least 7 apart.   

 

So for example – assuming the first fixture is DMX channel 1, the second fixture would need to be on channel 8, 

then the 3

rd

 channel 15 and so on. Some DMX controllers may group fixtures in lots of 16 channels – so in that case, 

fixture 1 on channel 1, fixture 2 on channel 17, 3 on 33, and so on. Refer to your DMX controllers’ instruction 

manual on how best to manage your DMX channel allocation. 

 

7. DMX-512 connection with DMX terminator 

 

 

A DMX terminator helps to reduce ‘noise’ on the DMX chain, and makes the light respond to control more 

accurately. It should be plugged in to the last fixture in any chain. For Terminator connections please see below: 

 

8. Cleaning and maintenance 

 

From time to time it is recommended the product is cleaned to ensure maximum light output and performance. Use 

a wet cloth to clean the housing as well as the lenses. Do not use alcohol based cleaners and solvents as they will 

cause damage to the product. 

 

When used in a fixed long term installation such as a venue or club, the unit should be periodically taken down from 

the installation and professionally cleaned. Dust build-up within the unit can cause damage and ultimately failure of 

components. 

 

 

9. Warranty 

 

This product is warranted for 12 months from your purchase date. We are confident that this product will give many 

years of trouble-free operation but should an unlikely problem arise, warranty claims must be via the original place 

of purchase, together with the original purchase receipt. Please keep both your original purchase receipt and this 

Содержание VIVID0312








Отзывы: