Stand-alone modes
THE laser can operate in stand-alone mode one of 3 ways: Auto or Sound-activated
Automatic fast Show / / Stand Alone mode (Auto)
1 Press the function button (MODE) to enter Mode options
2 Press the function button until the LED panel shows Auto
3 Press the Enter button to confirm the setting The laser will now be working in Automatic fast / Stand Alone mode
Automatic slow Show / Stand Alone mode (Auto)
1 Press the function button (MODE) to enter Mode options
2 Press the function button until the LED panel shows Auto
3 Press the Enter button to confirm the setting The laser will now be working in Automatic slow / Stand Alone mode
Sound Activated / Sound-to-Light / Stand Alone mode (Sound)
1 Press the function button (MODE) to enter Mode options
2 Press the function button until the LED panel shows Sound
3 Press the Enter button to confirm the setting The laser will now be working in Sound Activated
Color mode / manual setting mode (color)
1 Press the function button (MODE) to enter Mode options
2 Press the function button until the LED panel shows color
3 In color mode press ENT into manual setting submenu, setting parameter manually to set the display effect. Pressing ENT into
next setting till all finished then go back to home menu.
DMX mode
1 Press the function button (mode) to enter Mode options
2 Press the function button until the LED panel shows d001
3 Press the Enter button to confirm the setting or change the address using the Up and Down buttons 4 Press the ENT button
to confirm the setting The laser will now be working in DMX mod
DMX mode / DMX address setting
1
Ensure the unit is in DMX mode (see above)
2
Press the Up or Down buttons to adjust the DMX address
3
Press the Enter button to confirm the setting
If multiple connected units are to be controlled in exactly the same way, set all units to the same starting address (e.g. 001). If
individual control of multiple connected units is required, each unit must have its own starting address. This address must be at
least 10 channels apart e.g. set the first unit to 001 and the second unit to 011, the third unit to 021 and so on. The DMX
controller will now control all the connected units separately.
Master/Slave mode
1
Press the function button (MODE) to enter Mode options
2
Press the function button until the LED panel shows SLA
3
Press the Enter button to confirm the setting
The laser will now be working in Slave mode
To create a Master/Slave chain of units, one laser has to be designated as the Master unit whilst the remaining units have to be
set as Slave units. To set the Master unit, choose one laser and set it to your desired mode (Auto mode, Sound-to-Light mode,
etc). Next connect all other units via DMX cables. To achieve this, join the DMX output of one unit to the next unit’s DMX input
until all lasers are connected. Set all the Slave units to Slave mode (see above). The Slave lasers will now duplicate the actions of
the Master unit.
