3 of 4 pages
2. Select DMX mode. Also it can run in 3 different channel modes. Press MODE button to switch between
“DMX Mode” and “Standalone Mode”.
Choose the DMX starting address.
Press MODE button until the display shows “AXXX ”, then you can
choose “XXX” from 001 to 512 by press UP or DOWN buttons.
Choose the DMX channel mode.
Press MENU button until the display shows “CH:XX ”, then you can
choose “XX” from 01 to 04 by press UP or DOWN buttons.
On CH:01 mode, DMX channel 1 will control 4 output together.
On CH:02 mode, DMX channel 1 will control output 1 and 2 together. DMX channel 2 will control output 3
and 4 together.
On CH:04 mode, DMX channel 1 will control output 1, channel 2 will control output 2, channel 3 will control
output 3 and channel 4 will control output 4.
3. Select Standalone mode. There ar
e 16 chase programs that a user can select.
Choose the program.
Press MODE button until the display shows “
P:XX
”, then you can choose desired
program “XX” from 01 to 16 by press UP or DOWN buttons. After you have selected the desired program
you can then adjust the speed and intensity as required.
Choose the speed.
Press MENU button until the display shows “
SPXX
”, then you can choose the
desired speed “XX” from 01 to 99 by press UP or DOWN buttons.
Choose the intensity.
Press MENU button until the display shows “
DXXX
”, then you can choose “XX”
from 000 to 100 by press UP or DOWN buttons.