9
2 channel DMX Chart:
7. DMX-512 Control Connection
Using a 3 pin XLR cable, you can connect the product to a DMX controller and then to other fixtures
with 3 pin XLR inputs and outputs. When not using DMX, multiple fixtures can be connected together
and operate under master/slave control. The signal cable should have two core with shielded cable, the
signal connectors are XLR input and output connectors. Please refer to the below diagram:
8. DMX Address Setting
When being used in conjunction with a DMX controller, each fixture must be set a specific starting
address. When receiving signal, fixture will receive channel control signals of this address from the
DMX controller.
For simplicity, the user can use the same address for multiple fixtures but this will result in each fixture
providing exactly the same output and fixtures with the same DMX address cannot be individually
controlled.
To control each fixture individually via DMX, each fixture must have its own unique DMX address. If
this fixture is in 10 channel DMX mode then each address must be 10 channels apart. For example, if
the first unit is on DMX channel 1, the 2
nd
must be on DMX channel 11, the 3
rd
on channel 21 and so on.
DMX value
Function
CH1
Control mode
0-9
No function
10-69
Show 1: Gobo Derby LED show
70-129
Show 2: White LED + UV show
130-179
Show 3: Laser show
180-255
Show 4: Random effects
CH2
Show speed/sound
control
0-247
Show 1-Show 4 Speed from slow to fast
248-255
Show 1-Show 4 sound control