Item
Fixed arm
mounting
Slip fitter
mounting
U-Trunnion
mounting
Square-Hoop
Mounting
Round -Hoop
Mounting
8W Solar
Streetlight
1.Wall mounted
2.Square pole above
3.94 in
1.Round pole:
1.96 in - 3.54 in
2.Square pole
：
1.96
in - 3.54 in
Round pole:
1.96 in - 4.33 in
30W Solar
Streetlight
Wall mount or
Square pole wider
than 4.75 in
1. Round pole:
2.36 in -3.94 in or
Square pole: 1.97 in
-3.94 in
Round pole:
1.97 in - 4.72 in
Warning and Attention:
1. The average sunshine in the installation area should be above 3.5h/day in order to ensure full function
of the lighting fixture.
2. Before installation, please ensure the light pole foundation is solid enough to withstand lighting fixture.
3.
Position the lighting fixture to optimize its exposure to sunlight. Always face the equator (solar panel to
face south if in northern hemisphere for example).
4. In order to allow self-cleaning, please have a minimum angle of 15 degrees.
5.
For best results install on a day with full sunlight. If the battery is totally dead, please allow the battery
to charge under sun before programming it accordingly. (Please remove small plastic from remote)
6.
Adjust the angle of the fixture to optimize its exposure to sunlight. Adjust the LED module angle toward
the area to be illuminated.
7. The fixture is on once the power button on the remote is pressed and aimed at the fixture. Please
make sure the panel is installed under direct sunlight. The red light should be flashing, indicating that it is
charging.
You can also hit the test button on the remote to ensure that it is on and will receive 2 flashes
back from the LED light.
8. Select the necessary operation mode with the remote control. Please refer to the instruction manual of
the remote
control for further information. Note:
The remote has a range of 30ft
9. Use the dedicated tool to disassemble the anti-theft screws.
Note: Dedicated tool is included in the
box of each lamp.
Installation Accessories:
1.77 – 2.63 in
1.77 – 2.63 in
EPA RATING
