Light Bright
Formled 9 AUV
9. Use with Wireless Solution Radio
To connect the device to a Wireless Solution Transmitter, make sure RF 2.4 Setting and RF 2.4
Frequency are set to on. After entering the address, stay in this menu item and press the "Pair" button
on your Wireless Solution transmitter.
ATTENTION: To ensure that none of the devices connected in signal series is in master-slave mode,
disconnect the device from the power supply briefly. Thus the device remains on the already paired
frequency and is ready to play.
10
System Settings 1.White Balance
R: XXX
Manual correction: Red 0 - 255. Normal 255
G: XXX
Manual correction: Green 0 - 255. Normal 255
B: XXX
Manual correction: Blue 0 - 255. Normal 255
W: XXX
Manual correction: White 0 - 255. Normal 255
A: XXX
Manual correction: Amber 0 - 255. Normal 255
P: XXX
Manual correction: UV 0 - 255. Normal 255
2. Show Battery
Show Battery
(Yes) /No?
Set up if the Battery is shown in Display or not
3. Display Sleep
Display Sleep
Open
5Sec
10Sec
15Sec
Set up how long the Display is on
4. Dimmer Option
1. Normal
2. Dimmer - 1
3. Dimmer - 2
4. Dimmer - 3
Set up the Dimmer curve
5. Auto Power
Auto Power
(Off) /On?
Set up if auto switch to Battery if the Power is lost
6. IRC Setting
IRC Setting
(Yes) /No?
Choose if the IRC Remote is used or not
7. RF 2.4 Setting
RF 2.4 Setting
(Yes) /No?
Choose if th RF 2.4 is on or off
8. RF 2.4 FREQ
Reciever Pairing
Yes/ (No) ?
Choose if Reciever Pairing is on or off
9. Power Setting
Power Setting
1. High
2. Medium
3. Low
Choose the LED Power Mode
10. Emergency Lamp
Emergency Lamp
Yes/ (No) ?
Choose if the Emergency Mode is on or off
11. DMX Hold
DMX Hold
(Yes) /No?
Choose if the DMX Hold is on or off
Information
Led Temp:
XX.X°C
Display LED Temperature
Work Hours:
161 H
Display Work Hours
Software Version
V. 1. 06
Hardware version
OLED90 6in1
Display Software and Hardware Version
Power on
Display if powered on Accu or Cable
