Light Bright
Arond 200
3. INVERT PAN
Here you can invert the pan-movement of the device.
4. INVERT TILT
Here the tilt-movement of the device can be inverted.
5. SCREEN SAVER
Here you can switch the screen saver on and off.
6. CHECK
Here you can control the spotlight directly on the device.
7. LOAD DEFAULT
Here you can reset all set parameters to factory settings
8. SYSTEM TEST
10
Press "OK" to enter the settings and use the arrow keys to navigate to the sub-item
"Invert Pan". Press "OK" again to confirm and set the inverter to "Yes" or "No" to
switch the inversion on or off. Confirm again with "OK“.
Press "OK" to enter the settings and use the arrow keys to navigate to the submenu
item "Invert Tilt". Press "OK" again to confirm and set the Invert to "Yes" or "No" to
switch the inversion on or off. Confirm again with "OK".
Press "OK" to enter the settings and use the arrow keys to navigate to the sub-item
"Screen Saver". Confirm again with "OK" and switch the screen saver on or off.
Confirm with "OK" to save the settings.
Press "OK" to enter the settings and use the arrow keys to navigate to the "Check"
sub-item. Confirm again with "OK".
Here you can now change all parameters of the spotlight in the values 0-255.
Navigate to the parameter you want to change and press "OK". Now the value of the
parameter can be changed. After you have set the desired value, press "OK" again to
save it.
Press "OK" to enter the settings and use the arrow keys to navigate to the sub-item
"Load Default". Press "OK" again to confirm and reset all settings you have made by
confirming them.
Here the device performs an automatic test and runs all parameters and functions
automatically.
Press "OK" to enter the settings and use the arrow keys to navigate to the sub-item
"System Test". Confirm again with "OK" and the headlight starts directly with the test
program.
