Light & Motion Stella 180-L LED, Руководство пользователя

Страница: 16 / 36

16
Installation of Light and Battery
Installing light head assembly
Your Light & Motion Light head comes pre-assembled with the bar
style mount attached to the light head.
1. Determine the best location for your handle bar mount as it
relates to your specific brake/shifter bar layout. Ideally, the bar
mount should be attached to the right and as close to the stem
as possible.
2. After determining which bar spacer(s) to use (it may be
necessary to cut spacers), orient the bar mount with the
opening facing rear and the Light & Motion logo facing forward.
Securely tighten with the thumb screw.
3. The light head is then secured to the bar mount by using the
slide mount. Slide the base of the light head onto the bar
mount until it seats securely.
4. Once flush to front of mount, it will “lock” into place.
5. To remove, use your thumb to press the front edge of the
light base and push backwards.
a. Push base this direction to
attach light.
b. Push base this direction to
detach light.
a. b.