36
37
LIGADO NETWORKS
MSATe USER GUIDE
ESN/PSN
This option allows you to see the Electronic Serial Number (ESN) and Part
Serial Number (PSN).
1.
SELECT
the ESN/PSN option from the ADMIN Menu.
The Electronic Serial Number (ESN) and Part Serial Number (PSN) for the
transceiver unit (TU) will be displayed.
System Menu
When you
SELECT
the
SYSTEM
option on the
Main Menu
, you will be
prompted for the
System Password
. Type in the Password (the factory
default is 1234) and press
OK
.
The options on the System Menu allow you to change certain system
settings:
• Password
• Lock Code
• Beam/Signal: Off/On
Password
You can change the default
SYSTEM
password via this option.
1.
SELECT
the
PASSWORD
option on the System Menu.
2.
SELECT
the
SYSTEM
password option.
3.
You will be prompted with
NEW SYSTEM PASSWORD.
4.
Type in the new password (use
CLEAR
to backspace if you make a
mistake) and then press
OK.
5.
A confirmation screen is then displayed, asking you to re-enter the
new password. Type it in again, and then press
STORE
to store the
new password.
6.
You are then returned to the Password Menu. Press
BACK
to go back
to the System menu.
WARNING
: The system password is not stored at the network level
and as such cannot be recovered by Ligado. Please ensure internal
records reflect this change.
Lock Code
You can change the 4-digit handset lock code via this option.
1.
SELECT
the
LOCK CODE
option on the System Menu.
2.
You will be prompted to enter the new Lock Code. Type in the new
Lock Code (use
CLEAR
to backspace if you make a mistake) and then
press
OK
.
3.
A confirmation screen is then displayed, asking you to re-enter the new
code. Type it in again, and then press
STORE
.
4.
You will then be returned to the System Menu.
Beam Signal OFF/ON
This option gives you the ability to enable or disable the display of
the beam to which the radio has logged-on as well as the received
signal strength. When the option shows
BEAM SIGNAL: OFF
and you
SELECT
it, the option changes to BEAM SIGNAL: ON and the beam
display is
enabled
. When the option shows
BEAM SIGNAL: ON
and
you
SELECT
it, the option changes to BEAM SIGNAL: OFF and the
beam display is
disabled
.
When enabled, the beam display appears in:
• Idle State
• Call
Содержание MSAT
Страница 1: ...Mobile Satellite Radio User Guide...
Страница 29: ......
