Liftup North America, Inc. | 14928 Casey Rd | Tampa, FL 33264 | T: +1 844 543 8878 | M: [email protected] | www.liftup.us
31
USER MANUAL
–
RAIZER® II
–
US VERSION 03.02
11.
Charging the Raizer
The battery indicator (LED) lights green when
the battery is fully charged.
The battery indicator (LED) flashes red to
show that the battery capacity is below 10%
and the Raizer must be recharged.
NOTE:
The indicator only lights up when the lifting
chair is turned on.
The charger socket is situated in the same
place as the red stop button.
1.
Remove the stop button and plug the
charger cable into the socket. The plug is
mounted with a magnet and will snap into
place by itself.
2.
Connect the provided charger to the
socket on the Raizer.
Or use the provided USB cable.
NOTE:
Charging with the USB cable takes
considerably longer than with the charger.
The Raizer should be charged for at least 6 hours prior to its first-time use, as
required and as a miniumum every 6 months (with the provided charger). Approx.
10-15
minutes’ charging is sufficient for 1 lift. A full charge gives approx. 40 lifts at
room temperature. The number of lifts will be reduced at lower temperatures.
Battery indicator
