10
Unit Assembly
8.
Attach(toilet(seat(to(the(unit.(Use(a(9/16(wrench(to
(((((((tighten(hex(nuts.(Make(sure(toilet(seat(is(aligned(to(
(((((((top(plate.
9.
(((Carefully(tighten(hex(nuts(1/16”(past(snug.
10.
(Cycle(unit(using(the(hand(held(pendant(to(the(lowA
(((((((est(position.
11.
Insert(handle(bars(into(unit.(The(handle(bar(with(the(
(((((((oArings(on(it(should(be(inserted(on(the(motor(side(
(((((((of(the(unit.(The(oArings(are(used(to(prevent(the
(((((((hand(pendant(from(sliding(off(the(handle(bar.
12.
(Depress(the(upper(button(on(the(push(pin(and(
(((((((insert(handle(bar(into(the(bushing.(Release(buttton(
(((((((and(continue(sliding(handle(bar(until(the(lower
(((((((button(locks(into(place.
13.
(Repeat(step(12(for(other(handle(bar.
14.
(Use(the(Velcro(strip(to(secure(the(hand(pendant(
(((((((cord(to(the(base(area(of(the(handle(bar.(This(should(
(((((((be(done(to(prevent(the(hand(pendant(from(being(
NOTE:
Unit(shown(to(left(has(the(commode(kit(option.
Push(Pin
Caution! Do not insert the handle bar past
the lower push pin when attaching to the
unit. If installed incorrectly, the handle bar
