Liftkar MTK 190, Инструкция по эксплуатации

Страница: 11 / 20

Liftkar MTK I 11
6.1.2 BATTERY CHARGER
The battery charger supplied is extremely powerful. An LED display gives
a clear indication of charging status. The charge indicator gives you an
idea whether the battery pack is fully charged or not. It is worth checking
that the battery pack is fully charged before using the Liftkar.
Technical data
Mains voltage supply (50/60 Hz, 0,7A): 100-240 V AC
Nominal rating (input): 24 W
Charging voltage: 24 V DC
Theoretical charging current: 1,0
Protection class: IPX4
Safety approval: UL, cUL, CE
The charge status is displayed as follows by a LED:
If the LED is lit continuous red the battery pack is being charged.
If the LED is lit continuous green the battery pack is fully charged. The charger can be left connected to the
batteries after full charge (green light), without harming the batteries. The charger uses minimum power in
this stand-by mode, (after battery is fully charged), maintains the batteries at full charge and extends battery
life. This is accomplished with electronic circuitry that controls and regulates the amount of charging current
that is sent from the charger to the battery being charged
SAFETY GUIDELINES
Please note the following:
Protect against damp
Only charge in a well ventilated room
Do not pull the plug out of the socket by its cord
Do not operate charger with damaged cord or plug - replace immediately!
6.1.3 USE ONLY FOR THE PURPOSE INTENDED
The charger unit is designed exclusively for charging lead-acid batteries containing liquid, gel-type and
fabric-type electrolyte
It is not permissible to charge NiCd or NiMH batteries or primary cells.