14
Basic function setting and applying
1. Travel limit setting
Opening & closing force self-learning
Press ‘SET’ button and hold on until the LED displays figure
‘1’, then adjust the up limit by pressing ‘up’ button. Fine-tuning
‘up’ or ‘down’ button to determine the final up limit position
then press ‘set’ button the display turn into ‘2’ automatically.
Adjust the down limit
by pressing ‘down’ button. Fine-tuning
‘up’ or ‘down’ button to determine the final down limit position
then
press ‘set’ button. The opener will operate a cycle
automatically to remember the limit positions and the opening
& closing force.
2. Matching the receiver and transmitter
Press ‘CODE’ button and hold on until the LED dot is on.
(Fig. A) Then press any button on the remote once, the dot
will extinguish; press the button again the dot will fast flash
then LED displays ‘11’ (Fig. B). After that the remote will be
available.
Press ‘CODE’ button more than 8 seconds until the LED
displays ‘C’, all the stored codes will be deleted.
Fig. B
3. Safety reverse force adjustment
Press ‘SET’ button and hold on until the LED displays
‘3’. It’s under force adjustment mode. Press ‘UP’ button to
increase the force and ‘DOWN’ button to decrease the force.
The maximum force is 9 and the minimum is
1. Press ‘SET’
button to confirm.
4. Auto-close setting
Fig. A
