Scale
© Lift-Rite 242484-017
21
Adding weight results
The indicator offers the possibility to add weighings and show
the total weight. When a tare weight is active, the net weight is
added automatically.
1. Load the system with the weight that should be added.
2. Depress the
button to add the weighed load to the total
weight.
- The display shortly shows the message "ADDED" and
then automatically returns to the weighing mode.
- If a printer is installed, a printout will be made. The gross,
net and tare weights are totalled.
- No weight can be recorded twice. The system needs to be
returned to the net zero-range before another weight can
be added up.
3. The subtotal can be checked by pressing the
button for
3 seconds.
- The display shows the net total weight and the number of
weightings totalled so far repeatedly for 3 seconds.
- If the
button is depressed shortly during this period,
the total is printed out (if option is installed) and reset to 0.
- If the "CE" button is pressed during this period, the total is
reset but not printed out.
- If no button is pressed during this period, the subtotal
stays in memory and the system returns to the weighing
mode after 60 seconds.
Change units
The system is set to start up in 'kgs' or in 'lbs'. However you may,
at any time in the weighing mode, change to the second unit
(lb
ó
kg or kg
ó
lb).
1. Depress the
button for 3 seconds.
- The display will show the current weight in the new units
for 5 seconds and then automatically change back to the
start up units.
The same button is used to change from the piece counting
mode back to the weighing mode.
NOTE!
It is not possible to use any of the scale functions when the
display has been changed to the second unit. If any key is
pressed the indicator will display "ERR99" and return to nor-
mal weighing mode.
