background image

Lift-Rite, 

Tel:

 Toll Free from USA: 1-800-558-6012, Greene, NY 13778, Publication Number 1130442/001E ©2022                                                                    Dated 23 Sep 2022

3

SAFETY PROCEDURES

(Read and understand prior to using this product)

Read and obey all labels on this product. If you have any questions about these, ask your 
supervisor.

Do not operate this hand pallet truck unless you are authorized and trained to do so. 

Never overload your hand pallet truck. Stay within its rated capacity.

Do not operate this truck if damaged or not in proper working order.

Distribute the load evenly on the forks. Do not concentrate loads at one point or load one fork 
more than the other.

When the load impairs visibility, the hand pallet lift truck should be pulled and not pushed.

Always look where you are operating. Keep a clear view.

Only handle loads on flat level surfaces. Do not use a loaded truck on inclines or declines.

Never carry passengers. 

Never put your feet, hands, or any other body part under the frame assembly.

Always yield right of way to pedestrians.

Do not allow your hand pallet truck to drop from one level to another. Even a drop of 1 in.
(25 mm) more than doubles the effective load momentarily and results in a loading that can 
bend or break components.

Move loads only with the hand pallet truck in its lowest position.

Always make sure that the load is stable before moving to eliminate the opportunity for load 
shift.

Use extreme care when rounding corners. Too fast a speed could cause a hand pallet lift truck to 
tip. If loaded, the load could shift and fall. 

When not in use, fully lower the forks.

DAILY INSPECTION

At the start of your shift, check the items listed below. Report any malfunctions or unsafe conditions 
to your supervisor. Do not use this product until it is repaired.

CHECK 
POINTS

Steering

Hydraulic 
System

Wheels

Chassis/
Handle

Lifting/
Lowering

Labels

ACTION

Check full 
rotation

Check for 
excessive oil 
on exterior 
and check for 
function

Check for wear, 
damage, and 
remove debris

Check for 
damage and 
remove debris

Check for 
function

Check for 
readability

Содержание LCR55





















Отзывы: