LifeView FlyVideo series, Руководство пользователя

Страница: 7 / 42

Chapter I Setting up your FlyVideo Card
3
1.3 Hardware Installation
To install the FlyVideo series capture into your computer, follow
the steps below:
1. Turn off all your computer power sources and any
connected peripherals you may have (i.e., printer, external
drivers, modem, ...etc.).
2. Select any available PCI slot and remove the slot cover, screw,
etc.
3. Press the FlyVideo card firmly into the slot until it snaps in
place. And secure the card by replacing the screw you
remove from step 2.
4. Plug the TV cable onto FlyVideo series capture card’s antenna
adapter input.
5. Connecting video devices:
For FlyVideo’98 users:
1. SVHS Input (mini-DIN 4 pin)
2. To TV antenna
3. AV Input (RCA)
4. Audio Input (3.5
″
stereo jack)
5. Remote sensor connector
6. Audio Output (3.5
″
stereo jack) to speaker