16
TOOLS AND HARDWARE REQUIRED
X
SECTION 3 (CONTINUED)
Snap push button
into hole
Snap push button into hole
Press down on push button
BLX
BLX
B0F
BMD
Double-headed Push Button
3.2
• Insert the
Side Rail with Push Button (BMD)
and
Side Rail without Push Button (BOF)
into the
Front Legs (BLX)
until the push
buttons snap into the holes indicated.
!
• Attach the Front Leg Assembly that
has a double-headed push button on
the left side of the system as shown.
Double-headed
push button
Snap push button into hole
Press down on push button
BLX
BLX
B0F
BMD
BLX
3.3
• Press down on the push buttons on the Front Leg Assemblies and insert the swaged ends of the Front Leg
Assemblies into the
Lean Bar (BLW)
until the push buttons snap into the holes indicated.
Clip the Straps together
through
the loops on both sides of the Ball Return Ramp near the sleeve.
No Push Button
Press down on
push button
