12
TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
ALH
"-'
ADS
Align the hole in the
Top Pole (ALH)
with the slot in the
.JEEMF1PMF "-'
and
slide the Top Pole over the Middle Pole. Insert a
1/4” x 3/4” Screw (ADS)
through the small hole in the Top Pole and into the slot in the Middle Pole
as shown.
Note: The 1/4” x 3/4” Screw should be fl ush with the Pole, but
will spin freely once installed. Do not jam the Poles together
until instructed.
!
SEC
1.1
ADS
Y
ALH
"-'
Warning
Sticker
CIH
CIH
Y