background image

9

FIG. A,  ROOF MOUNT

FIG. B,  WALL MOUNT

MOUNTING KIT SOLD SEPARATELY

See details below.

FIG. C,  EXISTING POLE MOUNT

MOUNTING THE SYSTEM

LIFETIME

©

•  For mounting the Backboard & Rim Combo to a roof, wall, or existing pole mount that does not provide an extension, 

you must use a Mounting Kit designed for this purpose. Lifetime Products offers a Universal Mounting Kit, 

Model #9594

through our Customer Service Department. Figures A, B, and C show the Universal Extension Bracket mounted to a 
roof, a wall, and an existing pole. An Adjustable Height Mounting Kit, 

Model #1044

, is also available (fi gure D). 

Please refer to the information at the bottom of this page for ordering information.

PRODUCT DESCRIPTION   

 

MODEL #

Universal Mounting Kit 

 

9594

Adjustable Height Mounting Kit 

 

1044

Call our Customer Service Department at 1.800.424.3865 for prices and shipping costs.
To place orders, use a Master Card or Visa and call our Customer Service Department, or send check or money 
order to:

LIFETIME PRODUCTS, INC.

P.O. BOX 160010

BLDG. D-11, FREEPORT CENTER

CLEARFIELD, UT  84016-0010

•  The Universal Mounting Kit and the 

Adjustable Height Mounting Kit are not 
included with this basketball system. See 
details below to order the kit from our 
Customer Service Department.

!

FIG. D,  ADJUSTABLE HEIGHT MOUNTING KIT

Содержание 73729













Отзывы: