![Lifetime 60371 Скачать руководство пользователя страница 20](http://html1.mh-extra.com/html/lifetime/60371/60371_assembly-instructions-manual_1910889020.webp)
20
TOOLS AND HARDWARE REQUIRED /
OUTILS ET QUINCAILLERIE REQUIS
/
INSTRUMENTAL Y HERRAJE REQUERIDOS
X
SECTION 3 (CONTINUED) /
SECTION 3 (SUITE)
/
SECCIÓN 3 (CONTINUACIÓN)
ADV
(x6)
ADK
(x2)
ADV
ADV
EYR EYR
AEE
AEE
ADK
ADK
ADV ADV
ADV
ADV
• Secure with two (2)
screws (EYR)
, two (2)
washers
(AEE)
, and two (2)
nuts (ADK)
.
Do not overtighten.
• Le fi xer à l’aide de deux (2)
vis (EYR)
, deux (2)
rondelles (AEE)
, et deux
écrous (ADK)
.
Ne pas trop
serrer.
• Sujetarlo con dos (2)
tornillos (EYR)
, dos (2)
rondanas (AEE)
, y dos
tuercas (ADK)
.
No apretar
demasiado.
• Secure with six (6) more
screws (ADV)
.
• Le fi xer à l’aide de six (6)
vis (ADV)
de plus.
• Sujetarlo con seis (6) más
tornillos (ADV)
.
• Align the holes in the header with those in the gable.
• Aligner les trous dans le linteau avec ceux dans le pignon.
• Alinear los agujeros en el dintel con los de la fachada.
The fl at holes face away from the gable.
Les trous plats font face de l’autre côté du pignon.
Los agujeros lisos miran en contra de la fachada.
The dented hole faces downward.
Le trou bosselé est orienté vers le bas.
El agujero dentado mira hacia abajo.
!
!
3.10
3.11
AEE
(x2)
EYR
(x2)
3.9
3/8 in/po
(≈10 mm)