3
ASSEMBLY INSTRUCTIONS
A
1. FIX THE 4 LEGS USING 4 X SCREWS AND NUTS PROVIDED
2. POSITION BURNER VENTURI'S OVER GAS VALVES AND SECURE USING
SCREW AT POSITION A
3. LOCATE PAN SUPPORT AND ROTATE TO SECURE
4. FIX THE 3 AIR FLOW ADJUSTMENT SCREWS INTO THE BURNER VENTURI’S
1) IMPORTANT SAFETY INFORMATION FOR THE CORRECT SET UP AND USE OF
THIS APPLIANCE. ( GAS HOSE AND REGULATOR IS NOT INCLUDED WITH THIS
APPLIANCE )
1. Push the gas hose onto the hose tail of the control valve until none of the hose tail is
visible and secure tightly with a screwed hose clip.
2. Push the other end of the gas hose onto the hose tail of the regulator until none of the
hose tail is visible and secure tightly with a screwed hose clip
3. The regulator must comply with the requirements of EN 12684 :2001,
4. The hose used must conform to the relevant standard for the country of use, and the
length cannot exceed 1.50m. Worn or damaged hose must be replaced.
5. The gas supply hose should be checked periodically and should be replaced if
damaged or at least every two years.
6. This appliance is rated I3+ and as such can ONLY be used with either 13Kg Propane
or 15Kg Butane gas bottles.
7.
BEFORE USING THIS APPLIANCE YOU MUST CONDUCT A LEAK TEST AS
DESCRIBED ON PAGE 4
Содержание CA-GB15
Страница 7: ...7...
