LifeSpan Workplace SC120-2022, Руководство пользователя

Страница: 31 / 33

33
Treadmill Desk Troubleshooting
Problem: The desktop surface is not level.
Solution: Check to make sure the base feet are on a level surface. Run calibration by
pressing and holding the height adjustment buttons simultaneously for three
seconds.
Problem: “E32” appears in the display.
Solution: Check to make sure the motor wires from the Left and Right Motorized Legs
are properly connected into the Electronic Control Box. See page 17. Run calibration by
pressing and holding the height adjustment buttons simultaneously for three
seconds.
Problem: “Table Uart Communication Time Out” appears in the display.
Solution: Check both cable connections to the console and to the desktop motor
control are securely in place. Go to Settings in your console and check the setting for
Adj. Desk. For your LifeSpan standing desk set to ‘Present’ instead of ‘None’. If you are
using without a LifeSpan standing desk, set this to ‘None’.
Problem: The treadmill belt is beginning to slip and needs to be tensioned.
Solution: Refer to the owners manual included with the treadmill base.
Problem: The treadmill belt is beginning to drift to the left or right and needs
to be aligned.
Solution: Refer to the owner’s manual included with the treadmill base.
If you experience any other error codes, please call LifeSpan
Customer Support.