LifeSpan TR 2000-HR, Руководство пользователя

Страница: 11 / 26

Handlebar Assembly
1. (a.) Locate the console support tube. This tube is round and has one wire connector coming
out on the left side and 2 wire connectors coming out of the right side. First put the wire
connector on the left side through the round hole on the inside of the left support post so
that the connector comes out of the top of the post and insert the tube into the round hole
(see illustration A). Make sure that you can reach the connector from the top of the post.
(b.) Next, insert the two connectors coming out of the right end of the tube into the round hole
on the right side support post so that the wires come out of the top of the post. Now make
sure that you don’t pinch the wires while you insert the round tube into the right side post. To
do this, gently pull the 2 oval support posts apart, so that you have enough clearance to insert
the tube into the hole.
(c.) Once this is complete, connect the large wiring harness connectors on the right side and
push them into the top of the oval post so they are not pinched when the handlebar screws
are installed.
Make sure the small connector comes out of the top of the support tube and is easy to reach
for the next step (see illustration C).
4. Push on the plastic covers that go over the handlebar joint as shown in the picture.
9
c
a b
P u s h o n
P l a s t i c C o v e r