PROBLEM CAUSE CORRECTION
1. Treadmill will not start.
1.
Not plugged in.
2.
Safety key not inserted
3.
Treadmill circuit breaker
tripped.
1.
Plug into three prong grounded
outlet.
2.
Insert safety key.
3.
Reset circuit breaker (see
exploded view for location)
4.
House circuit breaker
tripped.
4.
Reset circuit breaker.
2. Running belt slips.
1.
Running belt not tight,
1.
Adjust walking belt
tension.( see Maintenance
Instructions)
2.
Center walking belt.(See
Maintenance Instructions)
3. Running belt speed is
not in the center.
1.
Running belt tension not
centered across the rear
roller.
1.
Set in kilometers.
1.
Change to miles per hour.
4. Running belt speed
seems slower than
displayed speed.
2.
Out of calibration.
2.
Recalibrate electronics
(professional operation only)
5. Treadmill squeaks when
walked on.
1.
Pivot points need
lubrication.
1.
Lubricate pivot points.
1.
Transmitter not making
good contact with skin.
1.
Moisten skin contact area on
the transmitter strap, or turn
transmitter strap upside down.
6. Heart rate not displayed
2.
Electromagnetic
interference.
2.
Turn off any television,
microwave, or computer within
6 feet of treadmill.
Before attempting any work on the treadmill, ensure that the power is off and
the plug is removed from the power point.
Do not use extension leads as it may lead to power decrease and failure.
Power Problems
1. Check fuses (They are located on the controller under the motor cover next to the
on/off switch.
2. Check power outlet (Plug something else into the power outlet to ensure that the
power outlet is working correctly).
3. Check Power Cable (You may need to take it to an electrician).
6 EXERCISE GUIDE
LIFESPAN SPRINTER
Page20
Содержание SPRINTER XL
Страница 25: ...8 EXPLODED DIAGRAM LIFESPAN SPRINTER Page0...
Страница 28: ...LIFESPAN SPRINTER Page1...