background image

 

18

We recommend lubrication of the deck according to the following timetable:

 

   Light use (less than 3 hours per week) every 6 months.

 

   Medium use (3-5 hours a week) every 3 months.

 

   Heavy use (more than 5 hours per week) every 6-8 weeks.

See below procedures for lubricating:

 

1.   Use a soft, dry cloth to wipe the area between the belt and deck.

 

2.  Spread lubricant onto the inside surface of belt and deck evenly (make sure the machine is

                   turned off and power is disconnected).
 

3.  Periodically lubricate the front and rear rollers to keep them at their peak performance. If

                   the treadmill belt/deck/roller is kept reasonably clean it is possible to expect over 1200 hours
                   before relubricating is necessary.

|  MAINTENANCE INSTRUCTIONS

Video Tutorial Available at: 

http://youtu.be/cP9NtFHfWlc

Lifespan Fitness YouTube Channel: 

http://www.youtube.com/user/treadmillsvideos

1.   Disconnect the main power supply.
2.  Fold the treadmill up into the storage position.
3.  Feel the underside surface of the running mat.

If the surface is slick when touched, then no further lubrication is needed.
If the surface is dry to the touch, apply a suitable silicone lubricant.

4.   HOW TO CHECK THE RUNNING MAT FOR PROPER LUBRICATION

Running 

Belt

Board

We recommend that you use a silicone based spray to lubricate your treadmill.
This can be purchased directly from us or any hardware store.

Video Tutorial Available at: 

http://youtu.be/cP9NtFHfWlc

Lifespan Fitness YouTube Channel: 

http://www.youtube.com/user/treadmillsvideos

Содержание Pursuit 3

































Отзывы: