LifeSpan LFT 05 WalkingPad M2, Руководство пользователя

Страница: 15 / 32

15
6. REMOTE CONTROLL NOTICE
7. ERROR WARNING LIGHT
If the remote controll has no responce or you change a new one, the remote controller and walking
device need to re-establish communication.
Remote control pairing method:
Restart the WalkingPad, press and hold down the mode switch button on the remote control
immediately, hearing the sound of "Beep" indicates the success of pairing.
NOTE: During the operation, the remote control should be close t the LED display panel of WalkingPad.
Error Warning Light on the display panel is off when WalkingPad works works well. When error occurs,
error warning light turns on and shows its error code.
E01 Upper control receives lower control data abnormally
E02 Hall fault
E03 Software overcurrent protection
E04 Locked rotor protection
E05 The data received by the lower control is abnormal
E06 Hardware overcurrent protection
E07 Motor undervoltage protection
E08 Motor overvoltage protection
E09 Motor phase loss protection
E10 Motor overload protection
E20 Abnormal Communication
E21 Sensor Failure
LEARN TO USE THE TREADMILL |