background image

 

                                                                              -    -                                                                         

DOMINATOR 
 

2

  Never drop or insert any object into any openings. 

  The treadmill is intended for in-home use only and not suitable for long time running. 

  To disconnect, turn all controls to the off position, remove the safety key, and then remove the 

plug from the outlet. 

  The pulse sensors are not medical devices. Various factors, including the user’s movement, may 

affect the accuracy of heart rate readings. The pulse sensors are intended only as exercise aids in 

determining heart rate trends in general. 

  Use handrails provided; they are for your safety. 

  Wear proper shoes. High heels, dress shoes, sandals or bare feet are not suitable for use on your 

treadmill. Quality athletic shoes are recommended to avoid leg fatigue. 

  Allowed temperature: 5 to 40 degrees. 

Remove the safety key after use to prevent unauthorized treadmill operation.   

 

1.1 IMPORTANT ELECTRICAL INFORMATION 

WARNING! 

  NEVER use a ground fault circuit interrupt (GFCI) wall outlet with this treadmill. Route the power 

cord away from any moving part of the treadmill including the elevation mechanism and transport 

wheels. 

  NEVER remove any cover without first disconnecting AC power. 

  NEVER expose this treadmill to rain or moisture. This treadmill is not designed for use outdoors, 

near a pool, or in any other high humidity environment. 

 

1.2 IMPORTANT OPERATION INSTRUCTIONS 

 

  Be sure to read the entire manual before operating your machine. 

  Understand that changes in speed and incline do not occur immediately. Set your desired speed 

on the computer console and release the adjustment key. The computer will obey the command 

gradually.  

Содержание dominator



























Отзывы: