background image

 

1. GENERAL SAFETY INSTRUCTIONS 

PURPOSE 

This product is intended for outdoor, domestic use only. It is not suitable for commercial or medical use.   
 
Weight Limit: Swing 50kg; Glider 25kg per side 
Maximum Fall Height: 1.83m 

1.1 DANGER FOR CHILDREN 

 

WARNING! No eating while using the product 

  This product may only be used with adult supervision at all times.   

  The packaging material is not suitable for children due to choking and suffocation hazards. 

1.2 RISK OF INJURIES 

  Do not use the product if it is damaged or defective. If it is damaged or defective, please contact a 

qualified technician. 

  Check the product before each use. Defective parts must be changed immediately as they can 

impair the function and the safety of the product.   

  No more than one person to use web swing, trapeze and swing at the same time.   

  2 users are required for the glider use at all time. 

  Use the product only on even and non-slipping surfaces. Never use it near water and keep sufficient 

space around for safety.   

  Beware of moving swings which could catch your arms or legs. 

1.2 PRODUCT DAMAGE 

  Do not make alterations to the product. Only use original spare parts. Qualified technicians should 

only carry out repairs – improper repairs can lead to danger for the user. Use this product only as 
described in this manual. 

  Protect the product against splashes, humidity, high temperature and direct sunlight. 

1.3 ASSEMBLY ADVICE 

  The assembly of the product must be done carefully and by an able-bodied adult. If in any doubt, 

ask a technically qualified person.   

  Before you start with the assembly, read the instructions carefully. 

  Remove all packaging materials and lay down all parts on an open space. This gives you an 

overview and simplifies the assembly procedure.   

  Check with the parts list that all parts are available. Dispose of the packaging material when the 

assembly is completed.   

  Beware that when using tools or doing technical work, there is always a risk of injuries. Assemble 

the product with care.   

  Create a danger free environment; for example, do not let tools lay around the workspace. Store the 

packaging material in a way that cannot cause any danger.   

  After installing the product according to the instruction manual, ensure all screws, bolts and nuts are 

correctly installed and tightened and that all joints are secure. 

  Reasonable space must be kept between the product and possible sources of danger, such as 

other equipment swimming pools and fences. 

Содержание LYNX LK30

















Отзывы: