LifeSpan Kids Kingston LK27, Руководство пользователя

Страница: 6 / 28

6
• The assembly of the product must be done carefully and by an able-bodied adult.
If in any doubt, ask a technically qualified person.
• Before you start with the assembly, read the instructions carefully.
• Remove all packaging materials and lay down all parts on an open space.
This gives you an overview and simplifies the assembly procedure.
• Check with the parts list that all parts are available. Dispose of the packaging material
when the assembly is completed.
• Beware that when using tools or doing technical work, there is always a risk of injuries.
Assemble the product with care.
• Create a danger free environment; for example, do not let tools lay around the workspace.
Store the packaging material in a way that cannot cause any danger.
• After installing the product according to the instruction manual, ensure all screws, bolts and
nuts are correctly installed and tightened and that all joints are secure.
• Reasonable space must be kept between the product and possible sources of danger, such
as other equipment swimming pools and fences.
• The product must be assembled correctly before use.
• Your play structure must be installed on a flat horizontal surface with a minimum of 2m
between it and any structure or obstacle such as a fence, garage house, tree branches, cloths
lines, or electric cables.
• Modifications made to the original product shall be carried out according to the instructions
of the manufacturer.
• The product must always be used in a well-lit area.
• Do not place anything under the product.
• Use gloves during assembly and disassembly.
• Outdoor products should be equipped with a device that in strong wind conditions avoid
displacement due to wind (e.g. steel bars in the ground or loads like sandbag or water bags).
• In certain areas during winter, snow buildup and the low temperatures can damage the
product. It is recommended to remove snow buildup and to store the product indoor.
• We strongly recommend visual inspections every 3 months to ensure the integrity of the entire
product. Replace any parts as necessary.
GENERAL SAFETY INSTRUCTIONS
1.4 ASSEMBLY ADVICE