© 2013 LifeSource Water Systems, Inc.
10
START-UP
1. Connect a hose to the hose bib on the outlet
of the tank. Run the hose to a drain.
2. Slowly/partially open the supply water ball
valve. Allow the tank to slowly fill with water.
When a steady stream of water appears at the
drain, close the supply valve.
3. Open the inlet and outlet valves on the
system. Transfer the bypass valves from
Bypass to the Service position. Open a nearby
faucet downstream from the ScaleSolver™
system to relieve any air.
4. Check for leaks. Repair as needed.
5. The system is now ready for service.
Installation, Operation and Maintenance Manual
ScaleSolver SS-7722
TM
