LifeSOS LS-30, Руководство по эксплуатации, Страница: 5 / 41

BASE UNIT
Front Panel Side Panel
Rear Panel
1. ALARM OUT SELECTOR: Set the Alarm Relay Output terminals as DC output or dry contacts when the
relay activates.
2. Terminal Board (Refer to the APPENDIX A-5) : One pair of Alarm Relay output, +12VDC (12~15V
/300mA max.) output and ground terminal, three wire sensor inputs, two Aux. outputs.
3. COM1 (Refer to the APPENDIX A-2, A-3) : Communication port for USB/RS-232 Adaptor, Ethernet
Adaptor and Data Communication Module.
4. COM2 (Refer to the APPENDIX A-4, A-6) : Communication port for Relay Module (XRM-01)/X-10
Power Line Interface Controller and GSM Module.
5. AUX Audio (Refer to the APPENDIX A-6) : Audio I/O for GSM module (GSM Module is optional).
Key Board & Status Display
Emergency Buttons
Speaker
LCD Display
Key Board
LED status
Speaker Volume Control
To trigger the Emergency help,
press both buttons simultaneously.
Microphone
Power adaptor I/P
2. Terminal Board
Telephone Line I/P
Phone Set Connector
Wire Duct
1.ALARM OUT SELECTOR
3.COM1 4.COM2
Key 5 & message in reading (Refer to A-1)
YES FUNC / ESC NO
Key D , DISARM & ENTER
Key 1 & Hands-free Telephone
Key 2 & Switch Control
Key 3 & Alarm Relay Control
Key 4 & Door Open (Reserved)
Key A & AWAY ARM
Key B & HOME ARM
Key C , STATUS CLEAR & PAUSE
3
5.AUX. Audio