6
4) Again, the default set temperature displayed on the LED display is 72
0
F. By pressing the
TEMP button, the LED display will switch to the temperature status and flash. You must
press the HI/LOW/UP button or
0
C/
0
F/DOWN button once again within (5) seconds to set
the desired temperature. Each time you press the HI/LOW/UP button, the temperature
setting will increase by 1
0
F. Press the
0
C/
0
F/DOWN button and the time will decrease by
1
0
F. The maximum temperature setting is 86
0
F (30
0
F). If you hold the HI/LOW/UP button
or
0
C/
0
F/DOWN button for (2) seconds, the number rotation will cycle more quickly.
5) Press the HI/LOW/UP button to switch from HI (rated at 1500W) to LOW (rated at 750W).
The default setting is HI.
6) To find the ambient room temperature, hold down the TEMP + TIME and then let go. The
ambient temperature will be displayed. To calibrate temperature setting, hold down the
TEMP button for (5) seconds to switch to thermostat calibration status. The LED display
will begin to flash. The default setting on the display is 00. The
0
F
or
0
C LED light will
illuminate. Press HI/LOW/UP or
0
C/
0
F/DOWN button to scroll up and down for the correct
calibration. The displayed temperature should match your wall or free-standing
thermometer within (2) degrees. Once the desired temperature is set, press TEMP again to
save your settings.
(Note: Make sure you understand the difference between the
set/desired
temperature and
the
ambient
room temperature readings on the heater. The
set/desired
temperature
reading is defaulted to 72 degrees Fahrenheit. You see this displayed when you first turn
on the heater. The
set/desired
temperature reading has nothing to do with calibrating the
Press TEMP to switch
to temperature status,
then press HI/LOW/UP
button once within 5
seconds to scroll up
From HI to LOW
