Before use
How to assemble the legrest
• W h e n the temperature is too low to run the machine, please increase the ambient temperature
gradually, do not increase the temperature in sudden. Please move the chair to the warm place
and keep on waiting for 1 hour before starting.Or it will result in moisture of parts and abnormal
operation.
Or it will result in moisture of parts and abnormal operation.
•
Loosen the screws on position "B" .
• Turn on power
,
and backrest will be reset.
• Connect the air hose from legrest to underneath of seat.
• Connect the connector "C"and connector "D".
• Align the screws "E"at screw holes "A" and "B",and tighten the screws.
Where to place the chair
A
•
Please do not use in a humid place such as sauna or bathroom.
•
Place on a levels surface before use.
e
Please do not use in the following situations: in a utility room or dusty place or
in high temperatures (over 40 °C).
e
Do not place it in the sun or near heating appliances.
e
Please keep cigarettes, ashtrays or flammable goods away from the massage chair.
..J
A
Please make sure that the massage chair has about 19.6in in front of it, leaving
about 19.6in behind the chair to allow free reclining of the backrest.
r
CAUTION
e
To prevent damage to the floor and reduce noise, please lay carpet under the massage
chair {do not use an e lectric blanket).
e
Please be careful placing this machines, as it is heavy.
e
To avoid excessive noise, make sure the massage chair is a minimum of
39.37in
away
from the TV radio and other AV machine
Picture1
Picture2
E
...
19.6in
19.6in
l
'
'
/
'
\
...
-
-
-
<
'
Picture3
Picture4
