Introduction
LIFESMART Infrared Heaters utilize the latest infrared heat technology. LifeSMART Infrared Heaters
provide a safe, convenient, clean, and economical way to distribute heat throughout your home or
business without producing deadly fumes or monoxide gases. Our heating system produces infrared
heat that can potentially relieve symptoms of cardiovascular conditions and inflammatory diseases.
Infrared heat technology, in general, produces rays that are safe and highly beneficial to our bodies and
health professionals have been using infrared technology for decades to treat muscle and joint pains.
LifeSMART Infrared Heaters are constructed of a wood housing. They are equipped with nylon caster
wheels for easy mobility. And the highly efficient filter can be maintained and cleaned by simply rinsing
with warm water.
Safety
USE CAUTION
Save these instructions because electrical safety is essential to keeping your home safe. When using an
electrical appliance, basic precautions should always be followed to reduce the risk of fire, electric shock,
and injury to persons. Please adhere to the following safety instructions:
The heater must be operated by an adult. Keep heater out of the reach of children.
Only operate the heater when it is on the floor.
Do not operate heater near any water.
Do not plug heater into any other cord connected device such as power strip, surge protector,
multiple outlet adapter, grounding adapter, outlet-type air fresheners or extension cords. Plug the
heater cord directly into a 3-prong 120V 15 amp grounded circuit receptacle.
Never plug heater cord into a loose fitting or broken receptacle.
Never alter the heater’s design or operation. Such actions will void warranty and could result in
injury and/or death.
Do not operate the heater if it has a damaged cord or plug.
Do not operate the heater if there are signs of malfunction. If the heater has been dropped or
damaged, do not operate.
Keep combustible materials such as furniture, pillows and other bedding materials, paper(s),
clothing, and curtains at least three feet away from all sides of the heater during operation.
Always unplug heater when not in use.
Do not use the heater outdoors.
Do not run heater cord under carpet. Do not cover cord with throw rugs, runners, or similar
coverings. Do not route cord under furniture or appliances. Route cord away from traffic areas.
Do not use the heater in bathrooms, laundry rooms, or similar indoor locations.
Turn off heater before unplugging.
Do not insert any foreign object or allow foreign object to enter the ventilation opening or
exhaust opening as this may cause electric shock, fire, and/or injury.
Never block the air intake or exhaust opening in any manner as this could lead to fire.
Do not locate heater, when in use, immediately below a receptacle.
Never operate heater in or around a bathtub, shower, or swimming pool.
Only open heater if instructed by an authorized representative of the manufacturer. There are
limited user-serviceable parts inside.
IMPORTANT INSTRUCTIONS
2
Customer Service and Support
To Obtain Warranty Support or Advice, Please Complete These Two Easy Steps:
Contact LIFESMART PRODUCTS Technical Support
:
Phone
:
1-8
6
6-484
‐
2066
You will need to provide the unit's model number, serial number (
located either
on the heater’s rear panel, or on the carton box),
date of purchase, retailer of
purchase, a daytime phone number, and a copy of your receipt if possible.
Be Patient, Clear, and Concise.
Describe the issue and symptoms you have for, and about the product. A certified
LIFESMART Technical Support agent will give you an evaluation of your issue
and your resolution options. If the answer is not available at that time, you will be
referred to the appropriate channels, or given a call/e-mail back within 72 hours
with an answer or resolution.
*E-Mail is the Preferred Method of Communication
11
