lifeSMART LS-926, Руководство пользователя

Страница: 7 / 18

Setting the Time, Date and Unit
(1) When the monitor is on , press and hold User 1 button for about 3
seconds to enter into Year Setting Mode.
To ensure the stored measurement result has correct time record,
please set time and unit before device is used.
(2) As below picture shown , the blinking numeral representing [YEAR].
Press “Query” button to change the numeral. Each press will increase
the numeral by one in a cycling manner.
Before use, switch the button to the “ON” side to turn on the monitor.
Note: If the button is on the “OFF” side, there is no reaction when
you press any button.
CAUTION
• Do not attempt to replace your blood pressure monitor’s battery. It is built-in
and not changeable.
• Only charge the battery in accordance with the user instructions supplied
with the blood pressure monitor.
• Avoid charging your blood pressure monitor in extremely high or low
temperatures.
• Do not use your blood pressure monitor while you are charging it.
• Do not attempt to disassemble the blood pressure monitor or force open the
built-in battery.
• Do not clean the blood pressure monitor when it is being charged. Always
unplug the charger first before cleaning the blood pressure monitor.
• Do not dispose of your blood pressure monitor in a fire. The battery could
explode causing injury or death.
• Batteries (battery pack or batteries installed) shall not be exposed to
excessive heat such as sunshine, fire or the like.
BEFORE YOU START
10 11
BEFORE YOU START
SYS
mm/Hg
DIA
mm
/Hg
PUL
m
in
MEM
Ti
me
/D
ate
SYS
mm/Hg
DIA
mm
/Hg
PUL
m
in
MEM
Ti
me
/D
ate