Open the LifeSmart App and initiate adding a device.
Installation of the BLEND Smart Switch involves high voltage
and should be done by a professional electrician.
Cut off the power leading to the BLEND Smart Switch and
confirm that the wiring is not charged.
Remove existing switch while keeping track of which wires lead
to each switch.
Grasp the back of the switch firmly. Apply pressure to the back
edge of switch face near the bottom to separate the front panel
from the back.
1
2
3
4
5
SET UP
Unscrew connectors and attach the wires to the connectors
following the connections shown in the Switch Diagram,
connecting wires based on your desired control solution. Wires
can be attached to any or all three "
switch-out
" connections
(L1,L2,L3), but the N and L connections must be made to power
6
