v0.4
LifeSentry
®
17
Make sure the AC Adapter is plugged into a live AC outlet
and into the Base unit.
Make sure the Master ON / OFF switch is turned ON.
What to expect:
The Red POWER light will be on if the Base unit is connected
to power.
If the POWER light is on and the Base unit is connected to a working phone
line, go on to step 3.
Step 4 – Make sure the Pendant and the Base unit are communicating
with each other.
Background information: The Pendant and the Base unit are connected by a
wireless radio link. They must be synchronized to work together. They should
have already been synchronized at the factory, but resetting this is simple.
What to do:
Follow the steps on page 15: Adding Additional Pendants to the
System
Now perform the System Check test again (page 12) to make sure all is well.
If your system is still not working, call your dealer or your service provider.
Information The FCC Wants You To Know:
FCC ID: TYD3X911
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Privacy of communications may not be ensured when using this product.
Canada IC: 8471A-3X911 This Class B digital apparatus complies with
Canadian ICES-003.
This equipment also complies with Part 68 of the FCC rules and the
requirements adopted by the ACTA:
US:TYDW400B3X911
REN: 0.0B
