manualshive.com logo in svg

Lifescan ONETOUCH BASIC (WITH DATA PORT), Руководство владельца, Страница: 17 / 98

Поделиться
Скачать
Lifescan ONETOUCH BASIC (WITH DATA PORT) Скачать руководство пользователя страница 17

9

IMPORTANT TEST STRIP INFORMATION

■

OneTouch

®

Basic

®

, Profile

®

, OneTouch

®

II Test Strips can be damaged by heat and

light. Keep them sealed in the original vial. Store the vial in a cool, dry place below

86

°F (

30

°C). 

Do not

refrigerate. 

Do not

place in direct heat or sunlight.

■

OneTouch

®

Basic

®

, Profile

®

, OneTouch

®

II Test Strips are intended for use with fresh

whole blood or OneTouch

®

Normal Control Solution. 

Do not

use them with plasma

or serum samples. Results will not be accurate.

■

Do not

use test strips beyond the expiration date on the vial.

■

When you open a new vial of test strips, record the discard date on the vial. The
discard date for test strips is four months after first opening the vial.

■

Do not

use test strips that are bent, torn, cut, or changed in any way.

■

Use each test strip immediately after removing it from the vial; replace the vial cap
and close it tightly.

■

Never transfer test strips to a new vial or any other container. 

Always

carry test

strips in their original container. 

Do not

carry loose test strips in your meter case.

■

Do not

use bleach (or products containing bleach) near the test strips.

■

For reliable results, use only OneTouch

®

Basic

®

, Profile

®

, OneTouch

®

II Test Strips

made by LifeScan.

DCO_06331801A_OTB_OB_US  11/25/03  3:27 PM  Page 9

Содержание ONETOUCH BASIC (WITH DATA PORT)



































































































Отзывы:

Нет отзывов